An Evaluation of Laser Cleaning as a Conservation Technique for an Archaeological Metal Coins

نوع المستند : مقالات بحثية

المستخلص

Preservation of cultural property for the future is one of the most important activities of our society. The information which we can gather from such materials is a valuable key to understanding the past. Recent developments in laser techniques in the conservation field have allowed us to test the laser cleaning , Although laser cleaning has gained acceptance in other areas of conservation (e.g. Stone statues and paintings) the process has not been widely applied to metal artifacts of historical value. The potential of laser techniques in conservation has needed a long development period to be fully demonstrated. The possibility to achieve a very precise and selective removal of deteriorated materials was implemented through a series of interdisciplinary studies focussed on laser ablation of specific materials .Therefore, the research will discusses and evaluate the use of laser as a modern technique for cleaning  an archaeological coins with multiple experiments of another researches.

الكلمات الرئيسية

الموضوعات الرئيسية


4.References
A. Siatou, D. Charalambous, et al.,  “A Comprehensive Study for the Laser Cleaning of Corrosion Layers due to Environmental Pollution for Metal Objects of Cultural Value: Preliminary Studies on Artificially Corroded CouponsLaser Chemistry · January (2007) , p.1.
A.Gervais, M. Meier, et al., “ Cleaning Historical Metals: Performance of Laser Technology in Monument PreservationLasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25, (2005) ,p.39.
A.Sarzyński , K.Jach, et al., “Comparison of Wet and Dry Laser Cleaning of Artworks Lasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.161.
Asmus, J.F., Murphy, C.G. and Munk, W.H., “Studies on the interaction of laser  radiation with art artifactsLaser Technology II, SPIE Proceedings Volume 41, Bellingham ,USA,(1973).
B.Salle, P.Mauchien, S. Maurice, “ Laser-Induced Breakdown Spectroscopy in open-path configuration for the analysis of distant objects”. Spectrochimica Acta Part B: Atomic Spectroscopy,62(8) (2007) p. 739.
Capucine Korenberg and Alexandra Baldwin., “Laser Cleaning Tests on Archaeological Copper Alloys Using an ND:YAG Laser” Hindawi Publishing Corporation , Laser Chemistry, (2006) pp.1-7.
Carla Lucía Soto Quintana., “ Development and optimisation of protocols for surface cleaning of Cultural Heritage metalsErasmus mundus master in archaeological  materials  science , University of  Évora , Évora, Portugal, September , (2016), PP.17-18.
Cooper M., “Laser Cleaning in Conservation An IntroductionButterworth-Heinemann, Oxford,(1998).
E. Drakaki, A.G. Karydas, et al., “ Laser cleaning on Roman coinsApplied Physics A 79  Materials Science & Processing ,(2004) ,p.1111.
E. Drakaki,a B. Klingenberg, et al., “Evaluation of laser cleaning of ancient Greek, Roman and Byzantine coin ”Surface  Interface Analysis. 42, (2010 ),pp.671–674
G Buccolieri et al., “Analysis of selective laser cleaning of patina on bronze coinsPlasma Physics by Laser and Applications ,Journal of Physics: Conference Series , Conference Series 508,(2014),pp.4-5
M. Davis., “Laser Cleaning the Abergavenny Hoard: Silver Coins from the Time of William the Conqueror ” Lasers in the Conservation of Artworks , Lacona VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.47-51.
 Omar Abdel-Kareem, Awad Al-Zahrani, et al ., “Evaluating laser cleaning of corroded archaeological silver coinsMediterranean Archaeology and Archaeometry, Vol. 16, No 1,(2016), pp. 135-143
Omar Abdel-Kareem, Awad Al-Zahrani, et al., “evaluating the use of laser in analysis and cleaning of the Islamic marine archaeological coins excavated from the Red Sea” International journal of conservation science, Volume 7, Issue 2, April-June 2016: 511-522, May,(2016),p.520.
Renzo Salimbeni.,“Laser techniques for conservation of artworks Archeometriai Műhely,( 2006/1),p.37.
S. Siano, J. Agresti, I. Cacciari ,et al.,  “ Laser cleaning in conservation of stone, metal and painted artifacts:  state of the art and new insights on the use of the Nd:YAG lasersJournal of Modern Physics , (2012) 106 , p.419.
Striebig, B.A., Roberts, T.L., et al., “Characterization of Emissions From Laser Removal of Surface CoatingsConference of Laser Materials Processing, ICALEO, Jacksonville, (2001).
Tam, A.C., “laser-cleaning techniques for removal of surface particulatesJournal of Applied Physics, Vol.71, No.7, (1992), pp3515-3523.
V.P.Veiko1, T.Ju.Mutin, et al .,“Laser Cleaning of Metal Surfaces: Physical Processes and Applications” ,The International Society for Optical Engineering · January ,(2008)
Walid K. Hamoudi, Mehdi S. Edan, et al ., “ Laser surface cleaning of stones and some metal objectsThe 5th International scientific Conference on Nanotechnology& Advanced Materials Their Applications 3-4 Nov,( 2015) ,p.973.
Watkins K.G., “A review of materials interaction during laser cleaning in art restoration” in: Kautek W., König E. (Eds.) “Lasers in the Conservation of Artworks” (LACONA I), Restauratorenblätter (Special Issue), Mayer & Comp., Vienna, (1997), p.7-15.
Watkins, K.G., “A review of materials interaction during laser cleaning in art restorationIn Kautek W., König E. (eds.) Lasers in the Conservation of Artworks (LACONA I), Restauratorenblätter (Special Issue), Mayer & Comp., Vienna, (1997), pp7-15.
Y.S. Koh , I. Sárady., “Cleaning of corroded iron artifacts using pulsed TEA CO2- and Nd:YAG-lasers Division of Manufacturing Systems Engineering Department of Applied Physics and Mechanical Engineering Luleå University of Technology Luleå, Sweden, December, (2005) ,p.33.
Y.S. Koh, J. Powell, et al., “Laser Cleaning of Corroded Steel Surfaces: A Comparison with Mechanical Cleaning MethodsLasers in the Conservation of Artworks , LACONA VI Proceedings, Vienna, Austria, Sept. 21–25,( 2005),p.13.
Yang Sook Koh., “Laser Cleaning as a Conservation Technique for Corroded Metal Artifacts” Ph.D., Division of Manufacturing Systems Engineering Department of Applied Physics and Mechanical Engineering Luleå University of Technology Luleå, Sweden, December, (2005),pp.7-11.